Finally, sourcing and bringing to you an affordable fun solution but this package is a steal.
This Rapid Trigger Flicker Kit is also made up of Carbon Fiber material , installs into any standard milspec lower for the most part.
Pop the upper, drop it in behind the hammer, close it, run it. This one system can easily be swapped to and from builds with ease.
Same function as the metal version but in carbon fiber.
Includes
x1 Carbon Fiber Rapid Trigger Flicker,
x1 Carbon Fiber 3 position selector,
Maby you don’t want to put metal on metal contact on your internals? This is for you!
An affordable solution that doesn’t add ridiculous internal wear over time.
(Aside from the rifle itself getting hot and normal wear and tear)
This device still forces the trigger back into action per shot, flicking your finger forward per shot. 1 shot, per pull.
These are rated to last 1–6k rounds depending on the setup, how over or under gassed the system is and other factors pertaining to how it’s running.
Runs on a standard 2 position selector, or 3 position selector but it’s not needed.
selector to fit. Fun on fun. Smiles on smiles.
No permanent mods or gunsmithing.
You will still need to make sure you have
-full auto bolt carrier
-h3 buffer
Due to slight tolerance differences in upper/lower combos, mainly rare variants like wide pocket m16 lowers or lbe branded for example, some fitting on the bottom of the device may be required. Drops in to 95% of ars "Out of the box" that have a full auto bcg and h3.
Do not modify this device as it’s different from a metal device!
30 DAY WARRANTY FOR AS MANY ROUNDS AS YOU CAN PUT ON IT!!!!!
By the time you have any problems, you will be ready for backups. If you’re not sick from the ammo bill you ran up..
If you have any problems within the first 30 days, just email a picture of your device to
blueridgecomponents@gmail.com
You will be taken care of.
(For the sake of the game if you ever have any problems please contact and physically show what’s going on?)
INTERESTED IN BECOMING A VENDOR TO?
EMAIL: blueridgecomponents@gmail.com
