Drop in Forced Reset Device

Our Drop in kit is s7 and 4140 hardened steel in combination. It installs into any standard milspec lower for the most part, nothing needs to be modified.
Pop the upper, set it behind the hammer, close it, run it. This one system can easily be swapped to and from builds with ease.

Runs on a standard 2 position selector, or you can use a super safety cut trigger and run a m16 3 pos lever. You can also cut your own 3 pos selector to fit. Fun on fun. Smiles on smiles.
No permanent mods or gunsmithing. To run 3 positions, you will need a super safety cut trigger + a m16 3 position selector.

Or, you can buy a pre cut 3 position selector or have your own cut.

The function is the same as the super safeties, so you will still need to make sure you have
-full auto bolt carrier
-h3 buffer
Due to slight tolerance differences in upper/lower combos, mainly rare variants like wide pocket m16 lowers or lbe branded for example, some fitting on the bottom of the frt may be required. Drops in to 95% of ars "Out of the box" that have a full auto bcg and h3.